We are independent & ad-supported. We may earn a commission for purchases made through our links.
Advertiser Disclosure
Our website is an independent, advertising-supported platform. We provide our content free of charge to our readers, and to keep it that way, we rely on revenue generated through advertisements and affiliate partnerships. This means that when you click on certain links on our site and make a purchase, we may earn a commission. Learn more.
How We Make Money
We sustain our operations through affiliate commissions and advertising. If you click on an affiliate link and make a purchase, we may receive a commission from the merchant at no additional cost to you. We also display advertisements on our website, which help generate revenue to support our work and keep our content free for readers. Our editorial team operates independently of our advertising and affiliate partnerships to ensure that our content remains unbiased and focused on providing you with the best information and recommendations based on thorough research and honest evaluations. To remain transparent, we’ve provided a list of our current affiliate partners here.
DIY

Our Promise to you

Founded in 2002, our company has been a trusted resource for readers seeking informative and engaging content. Our dedication to quality remains unwavering—and will never change. We follow a strict editorial policy, ensuring that our content is authored by highly qualified professionals and edited by subject matter experts. This guarantees that everything we publish is objective, accurate, and trustworthy.

Over the years, we've refined our approach to cover a wide range of topics, providing readers with reliable and practical advice to enhance their knowledge and skills. That's why millions of readers turn to us each year. Join us in celebrating the joy of learning, guided by standards you can trust.

How Do I Choose the Right Drill Bit Size?

Dan Cavallari
By
Updated: May 16, 2024
Views: 38,731
Share

Many novice woodworkers make the mistake of drilling screws into boards without first creating a pilot hole, through which the screw can travel with less friction and less risk of cracking the board. The correct drill bit size needs to be chosen in order to create a correctly sized pilot hole, and choosing the right size is not exceptionally difficult. If the wrong size drill bit is chosen, the woodworker runs the risk of splitting the board, or creating a hole that is too large and therefore not able to give the screw enough wood to grip into.

The right drill bit size will depend on the size of the screw, if one is being used, as well as the intended purpose of the drilling. To choose the right drill bit size for a screw, you can either obtain a drilling chart that outlines which size drill bit is most appropriate for the size of screw being used, or you can make the measurement by eye. Start by laying out a few bits that are similar in size to the diameter of the screw shaft. Hold the screw so the tip is facing you, and then hold different sized bits, one at a time, next to the screw. Try to find the drill bit that is slightly smaller than the diameter of the screw shaft, including the threads.

Choosing a bit that is too small will reduce, but not eliminate, the risk of cracking the wood when the screw is inserted. Choosing a bit that is too large will run the risk of preventing the screw from gripping into the wood. The bit should be only slightly smaller than the size of the screw for optimal screwing purposes.

The drill bit size can also vary if a countersink bit is being used. This bit features two cutting elements: the drill bit itself, and another, triangle-shaped cutting edge situated at the high end of the bit. This triangle-shaped cutting surface will cut into the face of the board once the bit has cut into the wood far enough. It will create a larger hole around the smaller shaft hole so a screw's head can be pressed until it is flush with the surface of the board. The length of the bit shaft will therefore be important as well as the diameter, and the diameter of the triangular cutting surface will need to match or come close to the size of the screw head.

Share
HomeQuestionsAnswered is dedicated to providing accurate and trustworthy information. We carefully select reputable sources and employ a rigorous fact-checking process to maintain the highest standards. To learn more about our commitment to accuracy, read our editorial process.
Dan Cavallari
By Dan Cavallari
Dan Cavallari, a talented writer, editor, and project manager, crafts high-quality, engaging, and informative content for various outlets and brands. With a degree in English and certifications in project management, he brings his passion for storytelling and project management expertise to his work, launching and growing successful media projects. His ability to understand and communicate complex topics effectively makes him a valuable asset to any content creation team.
Discussion Comments
By winslo2004 — On Oct 23, 2011

Proper bits are very important in a fabrication shop, since the thing you are drilling may be very large and heavy, and very expensive. The last thing you want to do is damage it.

The five people who had to work on it before it came to you tend to get angry when you call and tell them you need another one because you were too lazy to drill a hole first. People are funny that way.

By BigManCar — On Oct 22, 2011

I used to be terribly lazy about not drilling before I would drive screws, and I cracked a bunch of stuff. Now that I do it professionally, that won't do at all. I have do drill before I put in the screws. But I'm still lazy.

So, what I did is get one of those metal cards with the different-sized holes in it, which allows me to find the right size bit for the screw pretty easily. Find the hole that fits the screw, then use a slightly smaller drill bit. Nothing to it.

Most of the time I use the same size screws anyway, so I know what size bit to use. But I have the card if I need it.

Dan Cavallari
Dan Cavallari
Dan Cavallari, a talented writer, editor, and project manager, crafts high-quality, engaging, and informative content for various outlets and brands. With a degree in English and certifications in project management, he brings his passion for storytelling and project management expertise to his work, launching and growing successful media projects. His ability to understand and communicate complex topics effectively makes him a valuable asset to any content creation team.
Share
https://www.homequestionsanswered.com/how-do-i-choose-the-right-drill-bit-size.htm
Copy this link
HomeQuestionsAnswered, in your inbox

Our latest articles, guides, and more, delivered daily.

HomeQuestionsAnswered, in your inbox

Our latest articles, guides, and more, delivered daily.