We are independent & ad-supported. We may earn a commission for purchases made through our links.
Advertiser Disclosure
Our website is an independent, advertising-supported platform. We provide our content free of charge to our readers, and to keep it that way, we rely on revenue generated through advertisements and affiliate partnerships. This means that when you click on certain links on our site and make a purchase, we may earn a commission. Learn more.
How We Make Money
We sustain our operations through affiliate commissions and advertising. If you click on an affiliate link and make a purchase, we may receive a commission from the merchant at no additional cost to you. We also display advertisements on our website, which help generate revenue to support our work and keep our content free for readers. Our editorial team operates independently of our advertising and affiliate partnerships to ensure that our content remains unbiased and focused on providing you with the best information and recommendations based on thorough research and honest evaluations. To remain transparent, we’ve provided a list of our current affiliate partners here.
DIY

Our Promise to you

Founded in 2002, our company has been a trusted resource for readers seeking informative and engaging content. Our dedication to quality remains unwavering—and will never change. We follow a strict editorial policy, ensuring that our content is authored by highly qualified professionals and edited by subject matter experts. This guarantees that everything we publish is objective, accurate, and trustworthy.

Over the years, we've refined our approach to cover a wide range of topics, providing readers with reliable and practical advice to enhance their knowledge and skills. That's why millions of readers turn to us each year. Join us in celebrating the joy of learning, guided by standards you can trust.

How is a Jointer Used in Woodworking?

L. S. Wynn
By L. S. Wynn
Updated: May 16, 2024
Views: 65,086
Share

Wood is a beautiful material that is relatively easy to work with and has some amazing properties. One of the disadvantages to wood, however, is that it expands, contracts, cups, and warps in different conditions, so it is not as stable as stone or most metals. To begin a project, a woodworker usually starts with rough lumber and must go through various steps to ensure that it is flat. Some woodworkers prefer to use handtools only, but for those that use power tools, a jointer is typically used.

The majority of warping and splitting of wood occurs after it is cut out of the log and dried. Each board will continue to move throughout its life as the temperature and humidity changes. When a woodworker purchases wood from a lumberyard, it is rarely flat and smooth and special tools are required to prepare it for use in projects such as furniture.

A jointer includes infeed and outfeed tables, and a set of rotating blades is positioned between these two tables. A fence is set on one side to serve as a guide. The infeed table and outfeed table are adjusted so that they are close to parallel, but the infeed is slightly lower, exposing a small amount of the cutting blades. The woodworker presses the lumber against the infeed table and pushes it onto the outfeed table; the rapidly spinning blades remove a small amount of material. If the wood is particularly warped, several passes may be required.

After a sufficient number of passes, one surface of the wood is flat. The process usually continues with a thickness planer, another specialized power tool that removes wood from the opposite face of the board. A few passes through a thickness planer creates a board that has two flat and parallel face.

Next, the woodworker usually takes the partially surfaced board back to the jointer to square up the edge. In this instance, the board is placed vertically against the fence. A few passes may be required to get a flat edge that is square to the two faces. The remaining edge is usually squared up on a table saw.

The fence on most machines can be adjusted to various angles. By adjusting the fence in this way, the device can also be used to create chamfers along the edge of a board.

how is a jointer used in woodworking
Share
HomeQuestionsAnswered is dedicated to providing accurate and trustworthy information. We carefully select reputable sources and employ a rigorous fact-checking process to maintain the highest standards. To learn more about our commitment to accuracy, read our editorial process.
Discussion Comments
By anon222999 — On Oct 17, 2011

I'm doing a school project about the safety procedures and how a jointer works And I don't know anything about a jointer. Can anyone help?

By anon53917 — On Nov 25, 2009

When I use my jointer it gives me a concave edge. Any ideas to fix this problem?

By anon52309 — On Nov 12, 2009

The outfeed table should be level with the top of the cutter head. The cutter head should be no more than 1/8" higher than the infeed table, but I would only recommend about 1/16" or less, unless you have an extremely powerful jointer.

By anon37772 — On Jul 21, 2009

Why do I get a low spot at the end of my cut.

What do I need to know about safety using a 6" Powermatic model 50 jointer. Why do I get bumps on my cut of a 4x4 oak board.

By edgedown — On Feb 21, 2009

Will a jointer function well on an end grain surface?

thanks

By anon23446 — On Dec 25, 2008

Yes..This is the proper way to square up stock if (big IF) the tools mentioned are calibrated and have true edges themselves...it's why good cabinet quality tools are pricey.

By anon14745 — On Jun 23, 2008

Thanks for the directions. I, being a rookie woodworker, had them backward. Jack

By anon4940 — On Nov 06, 2007

how many blades are on the jointer cutter?

Share
https://www.homequestionsanswered.com/how-is-a-jointer-used-in-woodworking.htm
Copy this link
HomeQuestionsAnswered, in your inbox

Our latest articles, guides, and more, delivered daily.

HomeQuestionsAnswered, in your inbox

Our latest articles, guides, and more, delivered daily.